• 全国中文核心期刊
  • 中国科技核心期刊
  • 美国工程索引(EI)收录期刊

DUT-1合成模型冰的弯曲强度和弹性模量实验分析

李志军, 王永学, 李广伟

李志军, 王永学, 李广伟. DUT-1合成模型冰的弯曲强度和弹性模量实验分析[J]. 水科学进展, 2002, 13(3): 292-297.
引用本文: 李志军, 王永学, 李广伟. DUT-1合成模型冰的弯曲强度和弹性模量实验分析[J]. 水科学进展, 2002, 13(3): 292-297.
LI Zhi-jun, WANG Yong-xue, LI Guang-wei. Experimental analysis of flexural strength and elastic modulus of the DUT-1 model ice[J]. Advances in Water Science, 2002, 13(3): 292-297.
Citation: LI Zhi-jun, WANG Yong-xue, LI Guang-wei. Experimental analysis of flexural strength and elastic modulus of the DUT-1 model ice[J]. Advances in Water Science, 2002, 13(3): 292-297.

DUT-1合成模型冰的弯曲强度和弹性模量实验分析

基金项目: 国家杰出青年基金(59725919);中国博士后科学基金资助项目(98-6)
详细信息
    作者简介:

    李志军(1960- ),男,河北崇礼人,教授,博士后,主要从事寒区工程环境条件和环境保护研究.

  • 中图分类号: P731.15;P343.6

Experimental analysis of flexural strength and elastic modulus of the DUT-1 model ice

  • 摘要: 依据渤海海冰物理和力学特征值和国内水池实验室能力,以1:10~1:30比尺要求,发展了DUT-1合成模型冰.文中简介该模型冰的理想参数、成分和制备过程.就其弯曲强度和弹性模量进行系统的实验分析.通过500多次弯曲实验,获得该模型冰在不同加载速度下的破坏方式,各向同性证据和弯曲强度为35~65kPa和弹性模量平均53MPa的结果.并且得到弯曲强度和弹性模量在实测湿密度范围内呈递增关系,浸水模型冰性能稳定时间超过4h,弹性模量与弯曲强度之比82%超过2000.
    Abstract: The DUT-1 model ice is a new kind of synthetic model ice.Its characteristics,components and make processed are introduced.From a series of tests,the bending failures under different loading rates were obtained and the anisotropy behavior of the model ice was certified.It was found that its average flexural strength is 45 kPa and its average elastic modulus is 53.24 MPa.The flexural strength and elastic modulus increased with absorbed water amount and wetted density.Both became steady after water absorption 1 hour and kept the steady over 4 hours,which is longer enough for the performing model tests of ice interactions with structures and ice behavior.The ratio of elastic modulus and flexural strength was 82% over 2 000,which indicates that the DUT-1 model ice has the capability for the physical modeling tests in the scale of 1:10~1:30 based on Bohai ice flexural strength of 450~750 kPa.
  • [1] 史庆增.海冰的动力作用和冰力谱[J].海洋学报,1994,16(5):106-111.
    [2] 陈储军.白山水电站导流底孔排冰的试验研究[J].泥沙研究,1993,(3):42-52.
    [3] 李志军,王永学.渤海海冰工程设计特征参数[J].海洋工程,2000,19(1):62-65.
    [4] 李志军,李广伟,沈照伟,等.DUT-1模型冰的物理性质和弹性模量[J].自然科学进展,2000,10(10):931-935.
    [5] 李志军,王永学,李广伟.非冻结合成模型冰开展冰作用力物理模拟实验研究的进展[A].第十届全国海岸工程学术讨论会论文集[C],北京:海洋出版社,2001.
    [6] 隋吉学,孟广琳,李志军,等.环渤海海冰弯曲强度影响因素分析[J].海洋环境科学,1996,15(1):71-76.
    [7] Schwartz J,Frederking R,Gavrillo V,et al.Standardized testing methods for measuring mechanical properties of ice[J].Cold Regions Science and Technology,1981,4(3):245-253.
    [8] Jalonen R,Ilves L.Experience with a chemical doped fine grained model ice[A].In:Proceedings of IAHR Ice Symposium[C],Espoo:1990,2:639-651.
    [9] 李志军,彭万巍,吴紫汪,等.辽东湾海冰单轴压缩强度的孔隙率响应[A].第五届全国冰川冻土学大会论文集(上册)[C],兰州:甘肃文化出版社,1996,572-578.
    [10] Li Zhijun,Riska K.Preliminary study of physical and mechanical properties of model ice[D].M-212.Espoo:Helsinki University of Technology,1996.100.
计量
  • 文章访问数:  275
  • HTML全文浏览量:  61
  • PDF下载量:  675
  • 被引次数: 0
出版历程
  • 收稿日期:  2001-04-01
  • 修回日期:  2001-09-26
  • 刊出日期:  2002-05-24

目录

    /

    返回文章
    返回